Electrical connectors for 66 model year

[Miranthis]

Does anyone make or have a catalog of electrical connectors I don't see them in the electrical or standard parts sections of the service manual for 66. I need to replace one or two, specifically the wiring harness for the turn signals in the steering column. I would like to de-pin and replace the connector if possible.

 

[cudamark]

The factory parts manual lists them all.

 

[cudamark]

The turn signal connector packages are 2495541 female side, and 2585030 male side.

 

[Miranthis]

The turn signal connector packages are 2495541 female side, and 2585030 male side.

Thanks. With the part NUMBER now i can find it in the parts manual..... I was off looking for a list with drawings of the various connectors.... Appreciate it.

Does one of the repro companies make them? Just the connectors and terminals, that is.

 

[cudamark]

The companies that make reproduction wiring harnesses must be getting them from somewhere.....or making them themselves.

 

[Miranthis]

The companies that make reproduction wiring harnesses must be getting them from somewhere.....or making them themselves.

i am going to take some pics of them and try google lens image search.

 

[Firstblood]

If you are referring to this connector its available thru quite a few vendors.
63-69 turn signal connector.
The factory one on mine had the retaining pins that snap into the column broke off.
The original was 2 piece construction so you could slide it off without removing the snapped in part from column.
The new one was 1 piece, and if you want to remove it from the column you will most likely bust at least 1 tab.
I got my repo from the mopar shop but they all look like 1 piece construction on the repops.