Hemi Demon
Well-Known Member
Just wanted to chare a picture of engine swap in my -62 Valiant 360 Magnum 904 and 8 3/4
Last edited:
It is tight and i milled manifolds just under 1/4 for better clearanceLooks good. Truck exhaust manifold it looks like...hows the fit? Good idea!
It is tight on right side to but it works and the green is wery greenI have heard these fit our early A's, good to see they do work What year Truck are they ? other side fit fin ? Great move I bet Love the color of your 62 Valaint
It was some work whit the heater i modified a core from a Mazda modified the cower to fit. I eaven got room for brake servoLooks good. Truck exhaust manifold it looks like...hows the fit? Good idea!
I like your 200 moldings i did not find any when i rebuild mine
I removed 1/4 material on both manifold and it is still tightNeed clarification, did you remove just under a 1/4" of material or machine the mounting flange down to a thickness of just under 1/4"? Driver side only?
Great looking Valiant! Very nice workmanship!
Looks like a straight axle front? That's coolView attachment 1715157431 You guys both have nice cars. This is mine a survivor drag car from the 60s out of Phoenix
What year Exhaust Manifolds are they Do you have a pic of the manifolds or one of them on the engine before installed? If you would or could thank you! I am psyched out about getting this engineer now!Just wanted to chare a picture of engine swap in my -62 Valiant 360 Magnum 904 and 8 3/4
View attachment 1715156986
What year Exhaust Manifolds are they Do you have a pic of the manifolds? Or one of them on the engine before installed? If you would or could thank you! I am psyched out about getting this engine in now!
Was those truck exhaust manifold off of a 5.9 right