tubbedamx
Location Boise, Idaho
Hi, I have a '67 barracuda with a 360/727 with a set of '73 340 exhaust manifolds.
I need both driver and passenger side, 2 1/2 inch "I guess you could call it a Down Pipes" from the exhaust manifold down to where a set of long tube headers would generally end. Mandrell bent would be preferred but not necesarry.
Also, the hardware to connect the pipe to the manifolds.
I would take it to the exhaust shop but I have the car in the air and its going to be there for a little while...
Shipping would be to Boise, Idaho 83709
New or used would be ok.
Thanks Jim
email: AMXprmntl@aol.com
I need both driver and passenger side, 2 1/2 inch "I guess you could call it a Down Pipes" from the exhaust manifold down to where a set of long tube headers would generally end. Mandrell bent would be preferred but not necesarry.
Also, the hardware to connect the pipe to the manifolds.
I would take it to the exhaust shop but I have the car in the air and its going to be there for a little while...
Shipping would be to Boise, Idaho 83709
New or used would be ok.
Thanks Jim
email: AMXprmntl@aol.com
