[SOLD] Factory (edelbrock) alum intake

-
Status
Not open for further replies.
340 demon 72

340 demon 72

Well-Known Member
Joined
Feb 21, 2015
Messages
2,055
Reaction score
121
Location
Wisconsin
Rating - 100%
18   0   0
Contact seller
Resized_20161014_143914[1].jpeg
20161010_174649.jpg
20161010_174639.jpg
I've got a very nice edelbrock aluminum intake with a Chrysler part #on it. LD4B is the casting number on it. No stripped threads , could use cleaning up tho. Looking to get 300.00 or best offer for it and the carburetor. Plus shipping and 4% paypal Located in Kenosha Wisconsin.
20161010_174649.jpg


20161010_174639.jpg
 
Last edited:
the carb is not broken not sure where you see that it looks broke the carb will need to be rebuilt im sure
 
Look near the back of the carb, there is a piece that sticks up approx 1" only on the pass side. I believe there should be one beside it on the drivers side as well.
What is the carb?

Thanks Dar, I noticed the fuel inlet was different. Not sure which one of the car mfg it was for??
340 demon 72 said:
the carb is not broken not sure where you see that it looks broke the carb will need to be rebuilt im sure
Click to expand...

65Val said:
Steve...its definitely not Mopar....check the fuel inlet location.....
Click to expand...
 
sorry about that had the wrong carb on the intake but what you are referring too is the way it was cast
Resized_20161029_154852[1].jpeg
Resized_20161029_154859[1].jpeg
Resized_20161029_154913[1].jpeg
 
340 demon 72 said:
could have came on a mopar also heres a pic of an original 273 with carb View attachment 1714985059
Click to expand...
Your original carb picture is nothing like the 273 AFB you have pictured in post #16....check out the fuel inlet to start with...there are many other differences too. As has been stated, it's from an Oldsmobile. Yes, they are both Carter AFB carbs, but totally different application for each one.
 
Last edited:
Status
Not open for further replies.
-

Back
Top