fan shroud

[titanium]

I'm looking for a fan shroud(original rad.) for a 67 dart. It is a 273 car. Thanks

 

[clhyer]

I just made a fan shroud for my Duster. If you do not find a good one shoot me a PM and I will send a link with directions and my tips from having done it.
C

 

[titanium]

Thanks. Let me see what turns up for replies.

 

[bobscuda67]

What size fan are you using? I assume you have a 22 inch radiator too.

 

[titanium]

Yes a 22 inch stock 273 rad. The fan is a mopar 18 inch viscous. I did some searching of some old posts and a few had mentioned that a 614 shroud would work. The 614's measurements are the same as what the spacing on my rad.

 

[RedFish]

18 inches is a lot of fan for the 20 inch opening in the stock shroud. 1 inch clearance is tight. If the left motor support should ever break, say bye to the shroud.

 

[SGBARRACUDA]

Yes a 22 inch stock 273 rad. The fan is a mopar 18 inch viscous. I did some searching of some old posts and a few had mentioned that a 614 shroud would work. The 614's measurements are the same as what the spacing on my rad.

Good luck finding a 2785614 shroud. I've been looking for one for a while now. They do make new repops.