Fender braces for 68 Barracuda

[plugger340]

My Braces for my 68 Barracuda are bent out of shape and I’d like to know the approximate angles that each end needs to be before I install them. Does anyone have a picture of a picture brace for reference, or the angles they need to be bent to?

 

[Murray]

Those bends are close. Put them in place and tweek them more. They will not be flat.

 

[plugger340]

Those bends are close. Put them in place tweek week more.

Thanks, I’ll go with the left one as the right
brace is basically flat

 

[autoxcuda]

Some 68 barracuda fenders have these spot welded in.

 

[plugger340]

Some 68 barracuda fenders have these spot welded in.

Thanks, these are bolt on

 

[Trad68]

I just took mine off and the right one is what they should look like. Flat on one end and bent on the other.

 

[plugger340]

I just took mine off and the right one is what they should look like. Flat on one end and bent on the other.

View attachment 1716152653

Thanks, that makes more sense as one of mine was straight and the other was bent at both ends