Flywheel help ......please..

[russduanegreen]

I got a 11 inch flywheel 143 teeth . Casting # 2843212-2 nr. It came off a 318, but I know big block will bolt up too. It is for internal balance. Any body know what it's for.Did trucks use an 11 in flywheel ???

 

[Robbie2734]

Truck flywheel, can you get the bellhousing too?? I've never seen one used in a A body. Did it have the 833 OD trans?

 

[russduanegreen]

I bought it for a friend. I think the guy I bought it from had it on an engine with no tranny that he bought. I thought it might be big block...........oh well, I have no use for it........My friend still needs a 318/340 flywheel.

 

[d5667]

What do you want for it?

 

[russduanegreen]

open to offers

 

[warwagons]

This was taken from another forum.....

I should have posted this too, my apologies. The 360 flywheel out of my '90 W350 is indeed a 143 tooth, has the number 2843212 cast on the back. This number checks out with the Mitchel's book.

 

[Inertia]

Here's a reasonably priced new flywheel $100, for your friend.... a little heavier than stock... hope it helps

http://store.440source.com/1045-Billet-Steel-Flywheel-New/productinfo/113-1014/

 

[russduanegreen]

Thanks all for taking the time to respond.

 

[coolhandluke]

Did you find a flywheel? I have one, it'll probably need a new ring gear, but I have a friend who has a blanchard grinder and can resurface the face

 

[Mrmopartech]

Your flywheel 2843214 is a 67-69 383-440 11" 143 tooth unit for B&C body cars.Its of no good if you do not have the 11 inch bell housing to go with it.This is a forged crank unit,internally balanced,mrmopartech