[SOLD] For Sale Vintage Air Gen-II Super Cooler Universal Climate Control System

[johnmucci]

For Sale Vintage Air Gen-II Super Cooler Universal Climate Control System
I have a brand new never used
Vintage Air Gen-II Super Cooler Universal Climate Control System

this was purchased for another 66 dart I was going to build.. Finances dictate I must sell. It come with the unit, the wiring harness, the condenser, the adjustable servo heater control, and the basic control unit. New $489.not counting the condenser unit. $375 obo..plus the ride from 32724. This is the air,heat&defrost unit.
thanks!

 

[discharger1332]

pm sent

 

[CudaChris67]

I checked out the vintage air site, but there is no information for our application. Will this fit in the place of the stock heater only box- or is this pure custom with all kinds of fun drilling and patching required?

 

[johnmucci]

No one that I know of makes a specific air unit kit for an early Abody. I installed the Vintage Air in my 66 dart. I took the heater box out, I had the firewall holes sheet metaled and painted when I had the car repainted. You have several options as well, someone here on Abody was selling a cover plate for the heater box hole in the firewall and you can use the existing heater hose holes if you choose. I personally bought a bulkhead plate and ran the 4 hoses to the bulkhead plate mounted on the firewall and then to the compressor etc. Vintage air does sell the mounting bracket for your engine for the compressor as do several other vendors on the internet. You would need to fab a mounting bracket for the air heat defrost unit which is very simple.. some stock metal w/predrilled holes from lowes is what I used..you can make the install as pretty or as ugly as you choose. Here is a link if you look you can see photos of my install and on page 7 you can see the finished product...hope this helps.
http://www.forabodiesonly.com/mopar/showthread.php?t=54003&highlight=66+dart+owners+post&page=6