[WANTED] Ford 390 stuff

[496 polara]

Anyone here happen to have a used aluminum intake for a FE390 Ford? Other 390 stuff considered.

Thanks,
George

 

[pauly]

@RustyRatRod ?

 

[FISHYPETE]

@66340SEDAN

 

[lemondana]

Anyone in particular you looking for? I have a Ford buddy, He's got a pretty good collection of FE intakes. Need a 2-4 barrel?

 

[496 polara]

A 4 barrel aluminum intake would be preferable. A ready to go 2 barrel for the factory intake is an option as well.
Headers would be great but only thing I see is hooker super comp headers and they are PRICEY!

 

[RustyRatRod]

I don't have anything for the FE. That said, these are available for them. I don't know anything about them, but the pictures look ok.

FODE Intake

 

[496 polara]

I have looked at those and will likely try one if I put a 4 barrel on it. Edelbrock stiff is through the roof and I haven't found any used ones.
I would be okay with a holley 500 2 bbl but don't want to buy one not k owing if the throttle bores will clear the intake?
If that boat anchor of an intake comes off the China alum intake will go on.

 

[33IMP]

A 4 barrel aluminum intake would be preferable. A ready to go 2 barrel for the factory intake is an option as well.
Headers would be great but only thing I see is hooker super comp headers and they are PRICEY!

Imo, forget headers for an FE.
I had a 352 in a Galaxie, plugs were tight, as were the manifolds.
I had a 428 cj in a Ranchero, also with manifolds. I never did change plugs in it. Headers on either would have been a nightmare!

 

[33IMP]

I have looked at those and will likely try one if I put a 4 barrel on it. Edelbrock stiff is through the roof and I haven't found any used ones.
I would be okay with a holley 500 2 bbl but don't want to buy one not k owing if the throttle bores will clear the intake?
If that boat anchor of an intake comes off the China alum intake will go on.

Chinese 4412 500cfm 2bbl is $130. In your situation, I might give one a shot.

 

[RustyRatRod]

I THINK the Autolite/Motorcraft 2 barrels are the same patterns as the Holley 2300. I THINK. But I don't know for sure.

 

[bcschief]

There is a Facebook group dedicated to FE engines. Ford FE engine enthusiasts.

 

[496 polara]

Not on the book of faces.