Fuel Tank Pad?

[WARFARE]

Hi Guys, looks like my old fuel tank pad can't be removed in one or even two pieces.

What are you guys using or have used for this pad? Can't seam to find it at too many places and at $159 it's a bit pricey. ( http://www.jimsautoparts.com/fuelpart.htm)

I see Dante's has a rubber one for $18.00. Note sure what to use.

Pat

 

[mderoy340]

tar paper cut to fit

 

[65cuda360]

30 pound roofing tar paper or rubber fish pond liner.

 

[jerry6]

Hi Guys, looks like my old fuel tank pad can't be removed in one or even two pieces.

What are you guys using or have used for this pad? Can't seam to find it at too many places and at $159 it's a bit pricey. ( http://www.jimsautoparts.com/fuelpart.htm)

I see Dante's has a rubber one for $18.00. Note sure what to use.

Pat

What car it for , for A bodies it's 24.00 for foam rubber pad , the B and E bodies are 159.00

 

[4spdragtop]

Subscribed

 

[Bad Sport]

tar paper cut to fit

30 pound roofing tar paper

Yup ^^^^ cheap and easy. Cut to size, make some slits in it where it drops down into the recessed area for the tire well, done.

 

[inkjunkie]

contact Zigs, he was making some real nice ones for a while....think he may have stopped thanks to butting heads with the "powers that be".....

 

[GEO]

Lowes sells rubber mat by the foot , that's what I used

 

[dartnabout]

hmmm....

 

[ir3333]

you can use most anything as long as it's thick enough.
it's just to prevent rubbing and squeaks
...a bit oil if you use a thick fabric of some sort as there may be some condensation

 

[roccodart440]

Ice and water shield