gm 4 pin conversion ?

[acpat]

Amyone have the wiring diagram for this

Orange goes to W
Black goes to G
B is switched power
C is negative side of coil

found my instructions lol

 

[63 MorePar]

This is a simplified drawing of the wiring diagram necessary to make the conversion. Make sure the plate where the HEI module is mounted is securely grounded to the engine. If the engine runs poorly, try reversing the W and G connections.
Taken from Car Craft article. Good read.
http://www.carcraft.com/techarticles/1311_convert_a_ford_or_chrysler_ignition_to_gm_hei/
Larry :glasses7:

 

[67Dart273]

It would be better to post the diagram showing the distributor connector, because this shows not only connector orientation, but not all Mopar distributors use the same pickup wire colors. Polarity IS important for the pickup coil

My old henscratching

Sorry don't remember who created this one, ain't it nice?

To the OP. Do a search on this site. There is hundreds of posts on this subject.