GM Hydroboost and Mopar master cylinder ?

[rustytoolss]

Will a mopar aluminum/plastic master cylinder bolt directly on to a chevy astro hydroboost ? Is the rod that pushes the MC piston the correct length/ or will it need to be modified ? (asking about the internal hydroboost rod/ not the pedal rod)

 

[dodgedifferent2]

Also curious for future thinkibgs

 

[SLOPAR72]

You mean like this......

JW

 

[rustytoolss]

Yes like that. Did you have to modify the HB internal push rod ? And was your system a kit/ or a salvage yard unit ?

 

[SLOPAR72]

Yes like that. Did you have to modify the HB internal push rod ? And was your system a kit/ or a salvage yard unit ?

This is a Talon Hydraulics unit and came with the MC mounted. My gut reaction would be no it did not need modification however the guy was super nice and he can answer your question.....

JW

 

[Riddler]

No you won't need to modify the road. At worse you can use a shim to make up any difference.

Also note the hydroboost won't work in Hemi gen 3 swaps. Just not enough room.

Riddler

 

[SLOPAR72]

No you won't need to modify the road. At worse you can use a shim to make up any difference.

Also note the hydroboost won't work in Hemi gen 3 swaps. Just not enough room.

Riddler

It is pretty tight and I am just a LA based motor still sporting factory manifolds.... I am sure with something bigger in the engine department some changes to the firewall will occur...
JW

JW