Got a couple of questions

[yogibear7]

hey guys, so me and my uncle were looking around for power steering pumps and we seen a picture of a "chrome" power steering pump. Does anybody know where I could find one?
Also, we're getting ready to put the motor and transmission in our 67 cuda, do you guys have any suggestion how we should get the motor and transmission in with out scratching anything up?

Thanks guys

 

[photorep]

Do it from the bottom....

 

[memike]

Like this , hope this helps

[ame="https://www.youtube.com/watch?v=8HHQqGnU5DQ"]69 Superbee Engine Install.AVI - YouTube[/ame]

 

[66fyssh]

Yep, from the bottom will help you save the paint.

I did mine from the top and as careful as I was, I still scratched the firewall with the end of the transmission. I was doing it by myself so that didn't help. If you do it from the top, just make sure to put rugs or cardboard on EVERY paint surface. You also have to remove the hood...unless you jack up the back of the car to get a better angle.

In the picture you can see the rug I used on the grill.

 

[AJ/FormS]

The pump reservoir comes off real easy. If you chrome it,it will probably run hotter. Consider a P/S cooler.