Got me a 1978 Dodge Street Van to pimp out!

-
I had a spare flip gas cap from a barracuda so I decided to install that right away. It looks right at home on this old van. Just had to fab up a 3/8" spacer and an extension for the seal on the flap to keep the elements out. Used the same screw holes, even!
I also received the couple of patch panels today that I ordered on Monday and have a line on a fresh 360 for it, if I want to do that...
1 flip.jpg
1 flip2.jpg
 
skep419 said:
any updates?
Click to expand...
Oh yea, been doing quite a few things in my limited spare time, just been really busy!
I went through the front suspension with new coil springs & some of the steering gear, Lots of de-greasing, etc.

I got the driver's side patch panels done (mostly). Made a hood scoop and put carbon fiber overlays on that and the hood. Just acquired an Edelbrock performer intake and and 600cfm Eddy carb for it as well. Driving it quite a bit and enjoying it!
Here's a few photos, thanks for asking, gotta run!!! LOL
IMG_20160816_130432288.jpg
IMG_20160817_145318607.jpg
IMG_20160817_153052037_HDR.jpg
IMG_20160823_174026185.jpg
IMG_20160823_180330622_HDR.jpg
IMG_20160830_171520901.jpg
IMG_20160910_161359721.jpg
IMG_20160913_193329231.jpg
IMG_20160919_092725.jpg
IMG_20160922_180506539.jpg
 
I have an NOS set of rear window louvers,new lund visor and a custom made overhead console if your looking. I used to have a 77 Street Van
 
Nice score! Street Vans are pretty rare, and are bona fide collector's items. I grew up in a 72 Econoline 100 window van which my dad built into a camper for our family and it was my mom's daily - no power anything. I was 2 and a half years old when we picked it up at the dealer's in Birmingham and I remember every detail! Five years ago I went searching for a nice replacement, but this time with all the bling of a Chateau Club Wagon, full aluminum grill and chrome everywhere. 3 on the tree for me! Power everything and dual A/C, all original paint in two-tone metallic bronze and wimbledon white. It's an E200 though, which is better - an 8-seater. Gotta love these old vans!
 
It's been a while since I updated this, just been really busy busting *** on this van as well as my Barracuda.
But I got the bodywork done and a fresh paint job on it! Pretty excited for Mopars in the Park and other crusie-ins this Summer!



FB_IMG_1493005030873.jpg

Here's a sweet red love seat I plan to modify and install in the back.
IMG_20170423_115850801.jpg
IMG_20170425_140912003.jpg
IMG_20170425_141115106.jpg
IMG_20170430_174210660.jpg
IMG_20170503_161537843.jpg
IMG_20170503_165845413_HDR.jpg
IMG_20170503_165856037_HDR.jpg

The final late-night prep work before the paint job.
IMG_20170503_230617509.jpg

Installed some new porthole windows
IMG_20170503_230754263.jpg
IMG_20170505_175525863.jpg
IMG_20170508_075545819_HDR.jpg
IMG_20170508_075555451_HDR.jpg
 
Wow did you get that black to lay on them body panels like tinted glass! Nice!
:thumbsup:
 
groovy man... I also have a dodge van its a 91max with limo tint on the glass I use it for get aways It is a strait up best and i love it...nice van!
 
Wow, looks great! Time to jam some Master of Puppets and grab some friends.
 
Beautiful work, MobileCustoms. I really like your van. Here's a picture of my '77 B200 Sportsman Royal SE window van camper conversion that I've owned since new and is still
jeeves.jpg
one of my main drivers.
 
Gonna have some fun with a full vinyl wrap on it now (minus the roof). mocking up designs.... Hopefully, it'll be ready for Mopars In The Park on June 2nd-4th. I won't lose this one in a parking lot!
#GrooveMachine
1_Street_Van_FINAL-ALT.jpg
 
Last edited:
Since were all living vicariously through you and your van I vote to either drop it on air ride suspension, or pro touring it. would be awesome either way
 
Hello all just updating the post after gathering parts and doing the mock up finally got the body work done. Primered and block sanding this weekend hopefully paint next weekend. :lol:

IMAG1710.jpg


IMAG1714.jpg


IMAG1722.jpg


IMAG2056.jpg


IMAG2055.jpg


IMAG2057.jpg


IMAG2069.jpg


IMAG2072.jpg


IMAG2075.jpg


IMAG2081.jpg


IMG_01851.jpg


IMG_26521.jpg


IMG_26551.jpg


IMG_01831.jpg
 
MobileCustoms said:
I had a spare flip gas cap from a barracuda so I decided to install that right away. It looks right at home on this old van. Just had to fab up a 3/8" spacer and an extension for the seal on the flap to keep the elements out. Used the same screw holes, even!
Click to expand...
What did you make the spacer and seal out of? I would like to get one for my van.
 
for the spacer, I used a piece of 3/8" pvc stock i had laying around. I used a piece of thick rubber i also had laying around for the thicker seal.
I would think you could use an old mud flap from a semi truck, perhaps???
 
I know i posted this up in some other thread but I'll update my official thread here. I got the new vinyl wrap printed and installed a couple of weeks ago, just in time for Mopars In The Park. It was a big hit! Working more on interior stuff now and also just picked up a 360 to swap into it from one of our members here.
Cheers!
#GrooveMachine
IMG_20170526_215900.jpg

IMG_20170611_154607913.jpg
IMG_20170611_154933127.jpg

 
Last edited:
too cool.. i so want a short van lie that... the wrap seems like the perfect way to go these days...
 
MobileCustoms said:
Looking great! Where did you order the flare/spoiler kit from???
Click to expand...
Hey I got it from this company a little pricey but the quality is not bad. I think its going to add that look to it if you know what I mean. Yours looks BITCHEN that wrap is awesome definetly cheaper than a full out custom paint job:thumbsup:
 
You must log in or register to reply here.
-

Back
Top