Got my Bloomer headed 421 back running.

-
Awesome, make any changes? What’s the shift points now? What timing are you at on alky?
Limited the travel of front suspension. Took some preload out. Raised the wheelie bars to 7". Shift 1-2 @ 6600 and 2-3 @ 6800. Went 9.43 @ 139 in the qt
 
Limited the travel of front suspension. Took some preload out. Raised the wheelie bars to 7". Shift 1-2 @ 6600 and 2-3 @ 6800. Went 9.43 @ 139 in the qt
Nice pass, are you at 34 degrees total timing? Same on gas and alky
 
Nice pass, are you at 34 degrees total timing? Same on gas and alky
Yes. Still haven't worked on the jets or timing. It's still leaving with the lf higher than the rf. Still have some work to do
 
Last pass. Missed the tree. They set it on a pro tree.

20230907_194051.jpg
 
Thats a very nice pass, its still plenty hot here in the south, I am sure when October and November come along your ET's should drop a bit more. Best Wishes.
 
From what I can see that was done in 2000-2800ft air depending on the time the pass was made…. With water grains in the high 80’s low 90’s. Impressive!
 
-
Back
Top