Snake
Mopar Nut
Its out of an 86 Dodge Ram 80 thou miles,and had no knocks or ticks or any smoke at all.350,is what i paid,so cam,intake,maybe 340 heads,and I will be happy.
You know it.nice score - going in the Duster?
A new 1 is on its way.Are you going to have to put a car pan on it?
Ohhhh, that was probably the pan with the hole in it wasn't it?
A new 1 is on its way.
All most home lol.you do realize it is not "home" until it is in a mopar right?
Sound like a plan,however i am still concerned about my 318 pulleys going on the 360,the 360 balance r is a tad thicker that my 318 balance r.1 would think the 360 balance r will move the pulleys forward .I just don't remember seeing my old 360 with a thicker balance r all the pulleys off the 318 fit and lined up perfect.Nice. Those heads on it would work fine, just say'n, could save ya some dough. Also, they have the hardened seats. I personally would home port the heads, cut them .040 (no, you wouldn't have to cut the intake too..... now I'll take a beat'n ..lol), and freshen up the valves. Decent street cam and a 4bbl, you'd have a very low dollar engine that would work.
Everything is oem,after looking at some old pics of the 360 in my dart it looks the same,worry wort i am lol.No difference in pulleys between the two engines, maybe someone replaced the ballancer with the wrong one.