[Found!] Hardware wanted

[fnabody]

I'm looking for a pair (2) of original bolts and washers used to mount the Kelsey Hayes disc brake caliper to the spindle. I've included a photo of what I'm looking for. Thanks in advance for helping.

 

[Heywodja]

@hemi71x

He may have what you need.

 

[fnabody]

@hemi71x

He may have what you need.

No, he doesn't. Already checked with him. Thanks for trying to help though.

 

[Heywodja]

How about Peter Bergman @BergmanAutoCraft

 

[fnabody]

How about Peter Bergman @BergmanAutoCraft

No one that I know of reproduces this hardware. My only luck will be to find someone that has maybe stashed some of these away.

 

[BergmanAutoCraft]

No one that I know of reproduces this hardware. My only luck will be to find someone that has maybe stashed some of these away.

Can't you get these from AMK for a mustang?

 

[66fs]

Can't you get these from AMK for a mustang?

No, Mustangs used coarse threads, Mopar uses fine threads. Some one did reproduce them here. Not sure if they still do.

 

[BergmanAutoCraft]

Good to know.

 

[valiantpatrol]

Inbox full. Tried to private message.

 

[fnabody]

Inbox full. Tried to private message.

Inbox cleaned out, please try again.

 

[RustyRatRod]

You could always use grade 8 fine thread bolts and let a machine shop mill the threads down on the ends.

 

[No name needed]

Try these guys.
fastenersbydesign.com
https://www.fastenersbydesign.com
Industrial Fasteners - Reverse Engineered Fasteners

Start an Inquiry Quickly and Easily with Little Information. We Provide Solutions, Not Part Numbers.

 

[66fs]

You could always use grade 8 fine thread bolts and let a machine shop mill the threads down on the ends.

The real key engineering feature of those bolts are the shoulder that fits tight into a counterbore that gives it more strength than threads alone. The dog point just makes them harder to cross thread.

 

[66fs]

Try these guys.
fastenersbydesign.com
https://www.fastenersbydesign.com
Industrial Fasteners - Reverse Engineered Fasteners


View attachment 1716149406



Start an Inquiry Quickly and Easily with Little Information. We Provide Solutions, Not Part Numbers.

I have a drawing if someone wants to have them made.