67barracuda
Well-Known Member
Just got my hdk coilover kit installed. Looks great, glad to get ride to the torsion bars.
Last edited by a moderator:
How are you liking itJust got my hdk coilover kit installed. Looks get, glad to get ride to the torsion bars.
View attachment 1715185900
Just got my hdk coilover kit installed. Looks get, glad to get ride to the torsion bars.
View attachment 1715185900
Nice job!!
Hi Bob,
On the coil only conversion using factory attaching point, we are limited to a shorter shock, normally the Qa1 #DS /DD 303.
Extended ...12.65
Compressed...9.5
Installed height....approx 11"
On the rack and coil conversion, normally the Qa1 DS /DD 501 is the coil over of choice.
Extended....17.00
Compressed...11.625
Installed height....approx 14"
Hi Bob,
On the coil only conversion using factory attaching point, we are limited to a shorter shock, normally the Qa1 #DS /DD 303.
Extended ...12.65
Compressed...9.5
Installed height....approx 11"
On the rack and coil conversion, normally the Qa1 DS /DD 501 is the coil over of choice.
Extended....17.00
Compressed...11.625
Installed height....approx 14"
Would you be able to run qa1 lower control arms with this setup or is it required to use hdk lower control arms