headliner installation/ whats needed?? how to smooth out the fabric??

[snowmobiler7c]

I know i saw a thread on what was needed for the headliner installion but cant seem to find it now. I have a 70 swinger, already purchased the headliner years ago. I will be taking it to the upholstry shop next week to have it installed. I just dont want to forget any parts. I know I will need the Headliner/sail panel boards/sunvisors/rear view mirror/dome light/ and bows. Im also guessing i might need the rear window inside trim and the trim that runs along the tops of the doors? Is there anything else i need??

Also the guy at the shop asked me to lay the headliner material out since it has been in a box for several years. There are lots of seems in it from being folded. Is there a good way to get rid of the seems? I dont want to ruin the material but want to end up with the best job possible. thanks for any input
Mark

 

[Rocky_JS]

there are clips that the bows slip into also there are clips on the outside and under the inner roof trim covers that help keep it tight .

I would think that steam/moisture from a hot shower might do the trick with the creases.

 

[RedFish]

The material should be snake bite perferated vinyl. They all have those creases. Your installer will use heat and/or steam gun to remote the wrinkles and creases.