[WANTED] Heater control valve

[plymouth71]

Looking for heater control valve for 1971 Plymouth scamp slant 6

 

[1994redram]

What style is it? Post a pic of it. I have a good one from my 70 dart. I replaced it with a NOS one and found out tthatmy original wasn't ever bad.

 

[plymouth71]

Let me try to find it and I will post a pic,it's in the shed under about 200 other parts,I do know it mounts on inner passenger fender,one heater hose hook-up,and has a vacuum port

 

[1994redram]

The style I have has two vacuum lines. One to open it and one to close it.

 

[Sedanman]

This? http://www.ebay.com/itm/NOS-MOPAR-1...m35c770f9a3:m:mtM1kzASjtyO2fbslv3NuEA&vxp=mtr

There is a cheaper one. This is the heater core shut off valve for 67-71 a body cars with a/c

 

[plymouth71]

The style I have has two vacuum lines. One to open it and one to close it.

I can't seem to attach a pic(I'm on iPad)but I did find it and it only has one vacuum port.i thought I had lucked up and found one,I didn't realize there were other styles for 70's a-body,not sure if yours will work for me or not?

 

[plymouth71]

This? http://www.ebay.com/itm/NOS-MOPAR-1...m35c770f9a3:m:mtM1kzASjtyO2fbslv3NuEA&vxp=mtr

There is a cheaper one. This is the heater core shut off valve for 67-71 a body cars with a/c

That looks different than what I have,can't seem to load a pic from iPad,but I will keep trying.

 

[whitepunkonnitro]

You can modify a vacuum Actuator from a 67-72 A Body A/C systrm to work with that valve. Shorten and bend the arm, and its an exact replacement.

 

[rednesss]

Just grab one of these and save your money.

http://www.ebay.com/itm/390569679970?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[plymouth71]

The style I have has two vacuum lines. One to open it and one to close it.

What are you asking for your valve?

 

[plymouth71]

You can modify a vacuum Actuator from a 67-72 A Body A/C systrm to work with that valve. Shorten and bend the arm, and its an exact replacement.

Could I modify a dual vacuum setup to work with what I have?

 

[plymouth71]

Just grab one of these and save your money.

http://www.ebay.com/itm/390569679970?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

Have you used one of these?Did it work good and how did you mount it?

 

[whitepunkonnitro]

Could I modify a dual vacuum setup to work with what I have?

The vacuum sevo for the A/C is identical. The arm coming out is different. Just need to shorten it and make a 9O degree bend in the right place

 

[rednesss]

I have one on my Barracuda now, it's not really mounted, it's just supported by the heater hose. Works great.

 

[plymouth71]

The vacuum sevo for the A/C is identical. The arm coming out is different. Just need to shorten it and make a 9O degree bend in the right place

Ok Thanks,if I get one like this I'll know what to do

 

[plymouth71]

I have one on my Barracuda now, it's not really mounted, it's just supported by the heater hose. Works great.

Ok,Thanks I will save that link

 

[440Ken]

Check Rock Auto Parts....$33.79 also any jobber that carries the Four Seasons brand HVAC parts.

 

[plymouth71]

Check Rock Auto Parts....$33.79 also any jobber that carries the Four Seasons brand HVAC parts.

Thanks,I'll check into that