Hello New guy here

[Danny D]

Hello,

Just picked up a 1966 Plymouth Valiant Signet Convertible. Need varies parts including trim inner and outer. Please let me know what you may sell. Some things I need.
Rt fender antenna
Sill Plates
Rt Quarter body side molding close to door.
Has 13 inch wheels would like to go 14.
Radio
LT arm rest black
Back seat arm rest panels both.
Blank keys
Front bumper guards
Rear trunk mat
Jack and tools

 

[Dana67Dart]

welcome. you will need to make a wanted ad.

Mymopar.com has free factory service manuals PDF download, you may have to settle for Plymouth vs Dodge but the info is 90% the same for A bodies between the two for any year

Google "Chrysler master tech video" and a subject like "Gauges" there are corny videos but VERY well made by Chrysler for their techs. many are not very year or car dependent

You will find some GROUCHY old farts (me sometimes ) on here from time to time, try not to take it personally.

ALWAYS start a request for info or help with:


(Specific vehicle info is just for example)

Car Model - Dart
Car Year - 67

depending on what info / help your looking for

Engine - 273 2bbl / 4bbl
Trans - 904 / 727 automatic
Rear - 7 1/4 / 8 3/4

Then add as much relevant info as you can think of.

example:
BAD...
My car won't start what's wrong

GOOD...
67 Dart 273 2bbl

No recent changes to any systems

Has been starting fine for the past year

I went out to start it and it would crank but not start. it tries to fire but as soon as I release the key it dies

Fuel gauge shows 3/4 tank

Battery is 1 year old and was charged over night. it cranks the engine as it always has.


What I checked:

There is spark at the coil lead to ground during cranking

The voltage at the coil is 0V in run and 12V during cranking

the voltage at the ignition switch side of the ballast is 12V in run

The voltage at the coil side of the ballast resister is 0V in run but 12V while cranking.


Have fun and ask as many dumb questions as you can think of. We all learn something new every day!

 

[Lift&Move]

Welcome to FABO!

 

[MadScientistMat]

Welcome! Is it the armrest pads you're looking for? If so, check their length. I have a file for 3d printing the 10" armrest pads: Front armrest pad - fits 1963-1966 Chrysler A body

 

[missing linc]

from

 

[melcardona]

Hello,

Just picked up a 1966 Plymouth Valiant Signet Convertible. Need varies parts including trim inner and outer. Please let me know what you may sell. Some things I need.
Rt fender antenna
Sill Plates
Rt Quarter body side molding close to door.
Has 13 inch wheels would like to go 14.
Radio
LT arm rest black
Back seat arm rest panels both.
Blank keys
Front bumper guards
Rear trunk mat
Jack and tools

welcome dd.............ive bought parts from a few guys here ..very laget!! fare price..good parts..very nice gents....and what d67d said is true...grumpy sure but great info from top shelf front liners!!! good luck have fun...

 

[66fyssh]

Welcome to FABO from down Florida panhandle way!!

 

[Car Nut]

 

[Ottmundr]

Grumpy welcome from California!