Just as the title says...
Help me id this heater blower motor...
- Thread starter plumcrazy 101
- Start date
-
Just trying to confirm this blower is actually from a 68 Barracuda....
This is what the fellow who owns it this says...
This is what the fellow who owns it this says...
Well that narrows it down!
Obviously you don't know how to id this heater blower assembly from the backside.....
Thanks anyways toolmanmike....
The motor looks like Mopar but the bracket looks funky. A/C car may be?
JCFcuda
Active Member
67. Dodge dart non-air-conditiion
In your images, same as my 70 Duster, there is 4 studs that hold the firewall retaining on, the one in my photo's only show three studs for the ring...
any ideas?
any ideas?
According to the other photos, it looks like a heater hose tube goes through th hole and the other is held in place with the little bracket/tab.
Last edited:
There should be some numbers stamped I to the side of the motor.
Number on the blower motor 3503455
Second line of numbers 42166 1315
No numbers on the mounting plate but says made in Canada ISP
May be able to help id the blower motor.
Chrysler did not stamp the parts catalog number on blower motors. The first two digits stamped on the motor (35) tell us it's not from 1968. No numbers started with (35) in 1968,including cast, stamped or parts catalog part numbers.
The date code 1315 Translates to May 1975.
The bracket may have changed over the years but the bare motor interchanges from the mid 60's into the 70's.
So the motor appears to be from 1975.
Chrysler did not stamp the parts catalog number on blower motors. The first two digits stamped on the motor (35) tell us it's not from 1968. No numbers started with (35) in 1968,including cast, stamped or parts catalog part numbers.
The date code 1315 Translates to May 1975.
The bracket may have changed over the years but the bare motor interchanges from the mid 60's into the 70's.
So the motor appears to be from 1975.
Now on to the next challenge...
What does the mounting bracket belong to....
What does the mounting bracket belong to....
Rear defrost maybe...
-
