gdizzle
Well-Known Member
So for whatever reason my 66 dart doesnt have any hazard lights. So I found an old harness on eBay, but the switch is f'd. So I bought this other switch that I thought would be able to swap in. However the newer switch has the 4 terminals but they are too close for the connectors to just swap in. So I will need to cut off all the old terminals and use normal wire terminals. no biggie.
However my question is, does it matter which wire goes where??? and how do I orient it to match the old switch?? I have pics of the old switch, then the new switch. Which wires do I connect where on the newer switch? Does it matter?? thanks for any help
you can see on the old switch white and black wire, then below Green and brown.
However my question is, does it matter which wire goes where??? and how do I orient it to match the old switch?? I have pics of the old switch, then the new switch. Which wires do I connect where on the newer switch? Does it matter?? thanks for any help
you can see on the old switch white and black wire, then below Green and brown.