Holley carb info

[713404spd]

Today on a whim I bought a holley carburator from a buddy of mine for by dart. I don't know that much about it other than it's supposidly 600 cfm it is vacume secondary and the part number is 2818-1 I plan on putting this on a basically stock 360. Is this a good carburator for just a street car? What should I jet it at? Any info is greatly appreciated. Thankyou

 

[nqkjw]

Good all round carb that should be fine for street use.
65 jets,65 powervalve and make sure it still has a std silver spring in the secondary diaphram.
That's std out of the box jetting and should be good on a stock 360 in an A-body.

 

[713404spd]

That is what I like to hear. Thankyou sir

 

[abodyjoe]

8th number down. tells ya exactly how it came originally.

http://www.holley.com/data/TechService/Technical/Carb Numerical Listing.pdf