[WANTED] Holley Progressive 2 Barrel Carb 2305 Series WANTED

[Hyper_pak]

As the title states I am looking for an odd carb.
Going to use it on a slant six.

 

[abdywgn]

did you try Speedway? I remember them having some...awhile ago.
that would be good for a triple set-up...

 

[memike]

As the title states I am looking for an odd carb.
Going to use it on a slant six.
View attachment 1716372113

Carb ? Is that a holley carb number or adapter number? Just confused me a bit, I do have a couple carbs, posable adapter.

 

[Hyper_pak]

It's a carb series number.
Progressive throttle shafts.

 

[Hyper_pak]

did you try Speedway? I remember them having some...awhile ago.
that would be good for a triple set-up...

I will go check!

 

[Hyper_pak]

I don't find it at Speedway.

 

[Professor Fate]

You might try Tom Langdon at Stovebolt Engine Company- he was promoting the 2305s pretty extensively, but that was a number of years ago. He may still have some left, or know of a source.

 

[PROSTOCKTOM]

Carb ? Is that a holley carb number or adapter number? Just confused me a bit, I do have a couple carbs, posable adapter.

The 2305 series have throttle shafts that run front to rear and not sideways like normal carburetors do. They were very popular back in the day for 2300cc Pintos and Mustangs racing local dirt tracks. You are not going to buy one new as they haven't been offered in at least 25-years. They were available in 350-cfm and 500-cfm. I have tried for years to buy one with no luck. Good Luck

Tom

 

[RustyRatRod]

The 2305 series have throttle shafts that run front to rear and not sideways like normal carburetors do. They were very popular back in the day for 2300cc Pintos and Mustangs racing local dirt tracks. You are not going to buy one new as they haven't been offered in at least 25-years. They were available in 350-cfm and 500-cfm. I have tried for years to buy one with no luck. Good Luck

Tom

There's one on eBay right now. NOS but it ain't cheap.

 

[George Jets]

The Famous 32/36 Progressive Carburetor, They are all over e-bay for sale.

Looks like the Mr. Gasket 2 bbl to 4 bbl adapter plate you have there to go along with it. $25 bucks at Auto Zone... etc.



* * * * *

 

[RustyRatRod]

View attachment 1716372145

View attachment 1716372147

The Famous 32/36 Progressive Carburetor, They are all over e-bay for sale.

Looks like the Mr. Gasket 2 bbl to 4 bbl adapter plate you have there to go along with it. $25 bucks at Auto Zone... etc.



* * * * *

Those aren't even 300CFM, chief. He needs 350.

 

[RustyRatRod]

Weber 32/36 is 240CFM. Not enough for a stock 170.....I thought about one for Vixen but they're just too small.

 

[Charrlie_S]

Back in the late '70's early '80's I built my own out of a 4412 with vac secondary. Wasn't worth the effort. I never tried the Holly built unit.

 

[memike]

The 2305 series have throttle shafts that run front to rear and not sideways like normal carburetors do. They were very popular back in the day for 2300cc Pintos and Mustangs racing local dirt tracks. You are not going to buy one new as they haven't been offered in at least 25-years. They were available in 350-cfm and 500-cfm. I have tried for years to buy one with no luck. Good Luck

Tom

Will be heading to my sons shop at 10am, he and I have been hording 2 barrel Holley carb for 40 years, will see what I can find . Been building chassis and racing them for 35 years, hope I can snagged one up for you

 

[MV8]

I had a 2305 adapted to a chevy 2.8l v6-60. Great carb.