[SOLD] Hooker Super Competition Headers #R5116 Included Stage 8 Bolts and Collector Gaskets

[sgaugian]

eBay ad http://www.ebay.com/itm/221796314390?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

One set of Hooker Super Competition headers.
Hooker Part # R5116
INCLUDES: NEW SET OF STAGE 8 BOLTS WITH LOCKS.
$245.00 complete

Description:
Hooker Headers Super Comp. Header 5116HKR Black Finish - Full Length - Tube 1 5/8 in. x 35 in. OD - Collector Size 3 in. OD - Collector Length 10 in. - Port Shape Same As Port

They came off a 1970 Dodge Dart Swinger 340, with power steering.
They have very little run time other than being started after install, car was garaged.

FOR A-BODIES member I will give you both pipes welded to collectors that extend to mufflers. 2 1/2 pipes.

PACKAGE PURCHASE INCLUDES:
Headers
Collector gaskets & Bolts which can be seen in photo to be in excellent condition.
Instruction Sheet will be included within package.
STAGE 8 Locking Header Bolts "Complete", See photos.

"NOTE LOCAL PICKUP ONLY NO SHIPPING LOCATED IN MARYLAND"
OR CAN ARRANGE P/U AT CHRYSLER NATIONALS IF YOU ARE GOING TO BE THERE THURS. JULY 9TH

PAY PAL payment.

 

[sgaugian]

bump

 

[sgaugian]

bump

 

[doug 371]

those look like comps...not super comps...comps 1 5/8...super comp 1 3/4

 

[doug 371]

those look like comps...not super comps...comps 1 5/8...super comp 1 3/4

sorry guess I'm wrong...I have the same headers but always thought they were referred to as comps...

 

[sgaugian]

Here are some more pictures

 

[sgaugian]

Bump

 

[prostreeter9]

Do you know if these will work on a 64 valiant with a early 70's 318?

 

[rumblefish360]

Go to there web site for header fit charts.

 

[sgaugian]

Updated eBay link without bolts price and has shipping

http://www.ebay.com/itm/321783729751?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

[sgaugian]

bump

 

[Jpoo]

This may sound crazy, but do you have a picture of the backside of the pipe at cylinders 1 and 2? Specifically, if you were looking at the bolts going down the side from front to back, I'm wondering how its made around the 2nd bolt.

I've got a set of Hooker Competition headers and the back of the pipe is dipped in to make it easier to put in the bolts.... but the dip in is aligned with the front bolt holes, not the back ones. Its like they got confused and thought they were building chevy headers.

 

[sgaugian]

Here is 1-3

 

[sgaugian]

Here is the 1-3 pipe and 2-4 pipe

 

[tnts72]

Will these clear the big bulky factory starters? It doesnt look like there is any room on this 72 duster I just picked up...

 

[sgaugian]

It will fit. I had the factory starter and power steering. You have to raise the engine (during install) but to will fit. Install instructions to follow.