How do I adjust side window in 72 duster?

-

SgtLee511

Well-Known Member
Joined
Aug 28, 2011
Messages
220
Reaction score
10
Location
Atlanta,Texas
My drivers window has slipped an inch below the seal and the back of the window is not touching the rear seal. How do I adjust, I saw some large phillips screws that screw into the plastic groments on the window, are they my adjusting points?, I saw one towards the back and one near the front when the window is at its lowest poistion.
 
If the window is stopping a full inch short of all the way up the reason is probably in the regulator.
Tooth/teeth broken out of it is what I would look for.
 
you will need to investigate, did the glass used to match up against the seal?
there are mopar manuals online that might assist.
take your door panel off & check the regulator, my guess is the plastic regulator wheel broke off & that is your inch. Lawrence
 
-
Back
Top