jameskernz duster Man Joined Jun 29, 2011 Messages 186 Reaction score 10 Location Inverness, Florida Aug 23, 2013 #1 Is anyone running a Howards Cam in their 340?? Anyone have any problems?? Thanks
txstang84 Well-Known Member Joined Oct 10, 2011 Messages 4,556 Reaction score 554 Location Abilene, TX Aug 23, 2013 #2 If you run a search here in these tech forums, you'll likely find quite a few folks running them. I know I've seen a few on here that are happy with them...they're usually a little less and they come in a plastic case.
If you run a search here in these tech forums, you'll likely find quite a few folks running them. I know I've seen a few on here that are happy with them...they're usually a little less and they come in a plastic case.
RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member Joined Jun 7, 2010 Messages 104,892 Reaction score 102,518 Location Georgia Aug 23, 2013 #3 They have some nice grinds. Lots of lift with conservative duration figures.
70aarcuda Master Hoader of SBM Legendary Member Joined Jan 16, 2005 Messages 16,639 Reaction score 5,967 Location las vegas Aug 23, 2013 #4 I have one in our 71 360 Duster....great cam... if you look at their catalog ...the camshafts with footnote # 15 are new cams based on a .904 lifter... I am using a 242/242 .050 with .562 lift .... http://www.summitracing.com/parts/hrs-710831-08
I have one in our 71 360 Duster....great cam... if you look at their catalog ...the camshafts with footnote # 15 are new cams based on a .904 lifter... I am using a 242/242 .050 with .562 lift .... http://www.summitracing.com/parts/hrs-710831-08
Abodybomber Breaking street machines , since 1983.....:) Legendary Member Joined May 21, 2011 Messages 30,853 Reaction score 7,263 Location Arroyo grande ca Aug 24, 2013 #5 Installed, one of their hyd. rollers,in my 360 Magnum. The craftmanship kicks ***,on the Crower I pulled out.(I am a hard core,Crower guy,btw).
Installed, one of their hyd. rollers,in my 360 Magnum. The craftmanship kicks ***,on the Crower I pulled out.(I am a hard core,Crower guy,btw).