Hydraulic clutch

[68383GTS]

Has anyone used a hydraulic throw out bearing and master cylinder in there big block A body? If so what name brand do you have? And how well does it work?
Jegs sells a hydraulic throw out bearing for a 23 splie a883.I was thinking this bearing with a wildwood master cyclinder would work out.I have a 67 Barracuda,383,4 speed transmission,11 inch centerforce clutch.I need headers and a 11 inch bellhousing.

Thanks,Jim

 

[challenger57]

In my 63 valiant I am currantly building I put a 400 and a Driven Man 5spd conversion in it. The kit came with a Ram hydraulic throw out bearing and a Tilton master cyl. Both are pricey, about 150.00 each. I have only had the car running on jack stands but it seemed to shift nicely. Remember you have to remove the over spring from under the dash when using a diafram clutch like centerforce. A finger type clutch will not work with hyd. Good luck!!