i have a fuel system question

[tobysoldblue]

I have a summit fuel kit for my car,it has the pump,filter,braided fuel line,clamps,fittings,etc.The question is,how do i connect the braided fuel line to the factory tanks fuel inlet?I am going to upgrade to a 3/8 inlet,and i want a 1/4 inch return,so my pump runs cool.Or,could i reuse the 5/16 fuel line as the return?I know i would have to reroute it,or bend it some at the tank location,but that doesnt seem like too big of a deal.Heres the pump kit i have. http://store.summitracing.com/partd...925239+4294839053+4294846168+115&autoview=sku

 

[RedFish]

The new sender assembly tubing will need cut off behind the clamp budge (one of those midget cutters maybe) then gets a compression fitting.

 

[tobysoldblue]

guess its a good thing i found this place for the things i dont know!

 

[340mopar]

Useing the old 5/16" supply line as a return is a good idea and will work fine.


Chuck

 

[dusterdon]

You could use the sender as is by just using a normal worm clamp on the hose coming out of the sender/pickup.