Ignition switch wiring

[Dusterfool]

I have an ignition switch that the connector was cut off and the wiring butchered. Which wire is the ignition side of the switch?

 

[Professor Fate]

What year/model are you talking about? Go to mymopar.com and download the FSM for your vehicle, wiring diagrams are there.
There are two "ignition" wires, IGN1 & IGN2, start & run circuits.

 

[krazykuda]

I have an ignition switch that the connector was cut off and the wiring butchered. Which wire is the ignition side of the switch?

Download the proper service manual for your application and follow the wiring diagrams in the back of chapter 8...

MyMopar - Mopar Forums & Information - Service Manuals

 

[67Dart273]

^^Good advice above, I've posted this many times. The wiring colors have changed over the years. "Most of the time" the power in is the largest red, accessory out is large black, and ignition "run" is many years dark blue. Start is often yellow, the coil bypass is often brown.

 

[Dusterfool]

Thanks everyone, it’s on a 70 Duster, I found the schematic I needed.