Jeremiah (jd)
Well-Known Member
Contact seller
$2500 for everything in the pics. I was going to replace the valves and k liners but these could be run as is. Pressure tested w/ indicators and decks checked good at the local machine shop. These are older heads that have some miles but you won't get into a set of ported -1's and Jesel rocker arms any cheaper from what I have seen. Very nice porting work. All intake and exhaust bolt holes are helicoiled.
Moving to a 13 degree head otherwise I would be stabbing some guide liners and Ti intakes in to turn my 511" 8000+ rpm. Looking for 8500+ rpm so these must go.
Any questions please feel free to PM me here on the board.
Moving to a 13 degree head otherwise I would be stabbing some guide liners and Ti intakes in to turn my 511" 8000+ rpm. Looking for 8500+ rpm so these must go.
Any questions please feel free to PM me here on the board.