[WANTED] Inner fender well panel.

[circlepilot]

1965 Barracuda...I'm in need of a "serviceable" (or new...good luck!) driver's side, front, inner fender panel (the one that the battery tray and shock mount, are attached to.
Norm

 

[pishta]

Ask Lee Robinson Or KernDog if they has any more. The shock actually mounts to the top of the UCA mount off the frame rail, the inner fenderwell just has the hole for the stem. There are 2 being parted out in Hawaii on this board, if you can stomach the shipping. Quite a few spot welds hold them on.

 

[waggin]

I have some here in florida, if you just need a section take a pic of what you need and splice the section on

 

[65 Dartman]

I have a complete inner fender still spot weld to the frame rail, core support and firewall. PM if interested

 

[toolmanmike]

@halifaxhops is parting a early Barracuda as well.

 

[halifaxhops]

That sold fast thanks though

 

[circlepilot]

Thanks everyone.

 

[circlepilot]

Ask Lee Robinson Or KernDog if they has any more. The shock actually mounts to the top of the UCA mount off the frame rail, the inner fenderwell just has the hole for the stem. There are 2 being parted out in Hawaii on this board, if you can stomach the shipping. Quite a few spot welds hold them on.

Thanks pishta, you are right about the hole. My panel is actually spot welded to the UCA in several places around the hole. Yes! A lot of spot welds.