brian6pac Legandary Member Legendary Member Joined Nov 15, 2016 Messages 5,668 Reaction score 4,091 Location N.E.Ohio Aug 10, 2019 #1 I make any tool I need but never seen this one
Red63440 Olddawg Joined Dec 13, 2011 Messages 541 Reaction score 565 Location Batavia, NY Aug 10, 2019 #2 I was a Millwright for 47 years and had several of those in my tool box, those can be made out of old drill bits too. The bits give you a bigger selection of diameters and lengths.
I was a Millwright for 47 years and had several of those in my tool box, those can be made out of old drill bits too. The bits give you a bigger selection of diameters and lengths.
pishta I know I'm right.... Joined Oct 13, 2004 Messages 23,822 Reaction score 13,681 Location Tustin, CA Aug 10, 2019 #3 Tap them in, deform them and grab them with a pair of vice grips like a frost plug. looks doable....
G gzig5 Well-Known Member Joined May 3, 2018 Messages 2,837 Reaction score 3,813 Location Mequon, WI Aug 12, 2019 #4 That should work well on the LCA bushings. I used a standard cold chisel last time but will try this next time.
That should work well on the LCA bushings. I used a standard cold chisel last time but will try this next time.
D dogbreath Well-Known Member Joined Nov 29, 2009 Messages 511 Reaction score 292 Aug 12, 2019 #5 half round and cape chisels , been around for years