Is Gen 1 Barracuda door glass the same?

-

plugger340

Well-Known Member
Joined
Dec 7, 2010
Messages
460
Reaction score
54
Location
Red Deer, Alberta
Can the driver and passenger glass be used on either side? Can the rear chrome trim be reversed to use on either side?
 
Last edited:

Can the driver and passenger glass be used on either side? Can the rear chrome trim be reversed to use on either side?
The glass is flat, so, both sides will interchange. The stainless molding is specific to one side. A passenger side molding will fit on a driver's side glass and can be use on the passenger side.....and vice versa. It's not all that easy to swap that molding though....and get it stay on. I usually use a bit of glue. There are date code and logo differences between them, and both clear and tinted glass to keep in mind.
 
The glass is flat, so, both sides will interchange. The stainless molding is specific to one side. A passenger side molding will fit on a driver's side glass and can be use on the passenger side.....and vice versa. It's not all that easy to swap that molding though....and get it stay on. I usually use a bit of glue. There are date code and logo differences between them, and both clear and tinted glass to keep in mind.
Thanks for the info …
 
-
Back
Top Bottom