Is this right?

[Stroked68Dart]

Are these vacuum lines connected correctly? I have a Mopar Performance vacuum advance distributor, a Holley 4160 single pumper with vacum secondaries and electric choke. There is one vacuum line that goes from carb plate to both the choke and to the distributor via a T connector. Please see below photos and let me know if this is correct.

Thanks in advance.
Bill

 

[rickstershemi]

NO but here's a picture that should clear things up for ya......you want the dizzy hooked to the timed vacuum port.

Rickster

 

[805moparkid]

dont post the same thread twice...

 

[dodge freak]

People really still use those vacuum ports, lol

 

[moper]

No.
"vacuum" port to choke housing is not used. Cap it.
The port under the bowl is not used. Cap it.
The one on the side of the metering block is the ported vacuum port on a Holley so connect the distributor vacuum advance port to that one with a single hose.