k- frame swap

[sparty]

hello i have a 1970 swinger with a 225 slant six which k-frame will fit.
i have a 1976 aspen v8 (318) will it fit?

 

[RedFish]

no sir. Only the A-body K member will bolt in.

 

[sparty]

thank you. for your help first time at this so please bear with my ? or post if im at or do the wrong thing have enjoyed reading the forums

 

[2 Darts]

Not sure what you're asking. If it is about putting an Aspen (F body) K-member into an A-body, Red Fish is dead on. No go.

If you're asking about putting the V-8 from the Aspen into the Swinger, that you can do. Schumacher makes a kit that will allow your existing K-member to support the small block V-8. Other options involve swapping out the K-member for one designed to support a V-8. It just depends on your objectives and you budget.

 

[srduster340]

Trans Dapt has motor mounts to drop a V8 onto your slant 6 K member. Part #4695 for $59.95 at Summit Racing.