[WANTED] k member

[Resto]

Hey, i'm looking for a k member for a big block conversion. Going from a 225 /6 to a 440 in my 74 swinger.

 

[inkjunkie]

Are you going to build a bb k member?

http://www.bigblockdart.com/techpages/dck.shtml

 

[Resto]

Are you going to build a bb k member?

http://www.bigblockdart.com/techpages/dck.shtml

That's the plan...i'm open to all suggestions about easier ways.

 

[69MOPE]

That article does not say if that is a /6 or a V8 frame.
http://www.bigblockdart.com/techpages/dck.shtml

 

[discharger1332]

i have a s/b one sitting around.

 

[inkjunkie]

That article does not say if that is a /6 or a V8 frame.
http://www.bigblockdart.com/techpages/dck.shtml

just contact Jim Lusk.....he is a member here.....

 

[Resto]

i have a s/b one sitting around.

Pm sent

 

[Jimacuda]

That's the plan...i'm open to all suggestions about easier ways.

Schumacher '73 & Up A,B,C,F,M,J-Body S6 to B/RB Conversion Kit

159+$18 shipping

http://www.engine-swaps.com/Pages/ProductsYear/73UP.html#head1

 

[dartguy340]

Schumacher '73 & Up A,B,C,F,M,J-Body S6 to B/RB Conversion Kit

159+$18 shipping

http://www.engine-swaps.com/Pages/ProductsYear/73UP.html#head1

x2...This is a lot easier than trying to weld up one..I've used them.
:hello2:

 

[74DartSwinger360]

/6 and v8 spool mount k frames are different

 

[Jimacuda]

/6 and v8 spool mount k frames are different

Thats why you use the conversion engine mounts to put a small block V8 or big block V8 on a slant 6 K frame, instead of changing the K frame.

 

[A68DART360]

there is a big blk k-member for sale in mechanical parts section

 

[74DartSwinger360]

Thats why you use the conversion engine mounts to put a small block V8 or big block V8 on a slant 6 K frame, instead of changing the K frame.

Yea then pay 160plus shipping when you need a new motor mount. The reason why I am switchin out the previous owner installed Schumacher mounts for factory ones

 

[barracudakid]

i have a new set of schumacher big block mounts if needed
pm me

 

[72bluNblu]

Yea then pay 160plus shipping when you need a new motor mount. The reason why I am switchin out the previous owner installed Schumacher mounts for factory ones

No need to buy the whole mount, just buy new inserts for them. Just measure the inserts or pull the part # cast into them and email Prothane or Energy suspension. Schumacher doesn't make the inserts, they're either generic or re-tasked from another application.