[FOR SALE] Kb362.030 Pistons Brand New

[thomasfouraker]

Purchased for a project that never happened. Brand new in the box. Never opened.

Just outside of Jacksonville Florida.

$350 shipped.

 

[memike]

What engine?

 

[thomasfouraker]

These were purchased for a Magnum 5.9 360 but will also fit an LA engine.

What engine?

 

[memike]

These were purchased for a Magnum 5.9 360 but will also fit an LA engine.

Floating or fixed pins ?

 

[thomasfouraker]

Floating or fixed pins ?

Press or Full floating wrist pin according to UEM

 

[thomasfouraker]

Floating or fixed pins ?

UEM Pistons

here are then full specs. thanks!

 

[memike]

Press or Full floating wrist pin according to UEM

All my 360 engines are fixed pin, so I guess eather works, humm. Wondering.. !! .... let me dive into the pin and see if the weight is different, or what's the deal that la 360 pistons are pressed in..
Thank you, I have some investigation to do .

 

[thomasfouraker]

All my 360 engines are fixed pin, so I guess eather works, humm. Wondering.. !! .... let me dive into the pin and see if the weight is different, or what's the deal that la 360 pistons are pressed in..
Thank you, I have some investigation to do .

Sure thing. Let me know if you have any questions.

 

[memike]

UEM Pistons

here are then full specs. thanks!

There it is, yep, the pin is centered, not off set..
I better pass, thank you for your time, I would pull a piston out of a box you have listed and let members see it, or at lest one out, and a shot of the open box.. yep, centered won't work for me, but can be made to work

 

[thomasfouraker]

There it is, yep, the pin is centered, not off set..
I better pass, thank you for your time, I would pull a piston out of a box you have listed and let members see it, or at lest one out, and a shot of the open box.. yep, centered won't work for me, but can be made to work

Thought about doing that but hate breaking open the sealed factory packaging.

 

[thomasfouraker]

Accepting Offers

 

[Rapid Robert]

I believe that if the piston has a notch in the top on the edge that means it is an offset pin.

 

[memike]

To clarify these pistons centered or off set will work perfectly to replace the off set oem pistons.. sorry if I confused anyone