Kelsey Hays disc brake calipers

[eschroeder1]

Does anyone know of someone who rebuilds the KH 4-piston calipers? I have a set that came off a 68 barracuda that I need to get rebuilt.

Thanks,

Eric

 

[dartman340ta]

there easy to do get the kit an do it your self . takes no time at all . saves you $ for something else . i do them in about 30 mins

 

[RedScampi]

calipersonline.com did mine with stainless steel pistons. beddy nice.
http://www.calipersonline.com/

 

[Jim Lusk]

All parts are available to rebuild them yourself. Clean them real well and bead blast them. Don't worry about pits in the cylinder walls, but make sure the o-ring grooves are clean.

One thing to watch out for, and I'm not sure which boot type the 68 calipers have, is that there are two boot types. Some kits only have the early boot since it's the one used on Mustangs (yes, a nearly identical caliper was used on 65-67 Mustangs). If the caliper kit has four of each style you will be fine.