Last I looked it was still there, Can't see passed my nose but I think I'm good.
Last one to post in this thread wins!
- Thread starter oldkid
- Start date
-
Awww so cute Fred !That will sure keep you busy ! That's great she will sit through a story . My 2 year old won't sit still for 2 seconds , always on the go , has to run everywhere .
Yep got one also and your'e right can't set still for more than a minute.
chryslerfat
Well-Known Member
Word
Mark Wainwright
Well-Known Member
Morning gents. Wow what a difference a few days makes. From sweating to getting a sweatshirt in a matter of hours. Yesterday at the car show is was really cold and a cold wind to boot. Good turn out though considering. 71 cars and lots of people milling around. 50/50 was just over 400 bucks but I didn't get it. Got chilled and couldn't get warm all night.
They all look good Mark, You sure have a lot of nice cars up there.
Glad it cooled down but sorry that much, it did the same here.
Glad it cooled down but sorry that much, it did the same here.
Mark Wainwright
Well-Known Member
Morning Fred...yeah it's getting that time of year when you don't know how to dress for the day. Cool in the mornings, warm in the day and cool again at night. They had snow way up North yesterday. Snow is a 4 letter word in my vocabulary.
If I could I would jump in the motor home and head south for part of the winter but still have my youngest living at home so will have to wait 2 more years. Not a big deal he is a good kid and in joy having him around.
How's the new shed working out Mark.
Went down to 58 F here Mark , what a difference !
Mark Wainwright
Well-Known Member
The shed is really good. Very happy with it. Like I said earlier it's a little smaller than the one we had but got rid of stuff we didn't use anymore so all is good. Supposed to get 20-40mm (1.5 inches) of rain starting tonight so it'll be a good test. Nice you still have one of your kids still at home. Good company for you Fred.
Mark Wainwright
Well-Known Member
Difference is right..almost a 50 degree drop in temperature over a matter of two days. Still half frozen from yesterday. Good weather to work in though and good sleeping weather. Back to mid 30's this week though.
Just sitting here talking to my son he just got off work. Yea I need him around for awhile longer.
That's a fair bit of rain Mark hope you can swim.
Mark Wainwright
Well-Known Member
I'm building an ark as we speak
Don't forget to build a ramp to get the Cuda in it, and screw the animals get all the old cars on it instead.
Mark Wainwright
Well-Known Member
Turn the shed upside down flex seal, your all set !
First empty all the garden tools and lawn mower to make your life easier but grab hold of the bag of Pete moss to make your wife happy and if you can don't forget the Miracle Gro.Turn the shed upside down flex seal, your all set !
Hey FOG been looking at new upper A arms for my scamp from QA1. Are you happy with yours and were you able to get it aligned right. My stock ones they tell me will not get close enough to keep the tire wear even.
Well Fred should have done it a long time ago , what a difference ,I enjoy driving the car now ! The reason I was so far out was you should mark the camber bolts before you take them out , so you get it relatively close when you put the new ones in. Let me tell you those bolts were never changed since 1973 they were rusty and fought me every 1/8 of an inch. I tried an impact chisel but the bolts are in rubber bushings so that did no good , soak and chisel, took me hours for one bolt, one was easy . My son did it on a laser alignment machine and because I also changed the height by the torsion bars . So it was way out but he got it . Handles so nice . Worth every cent ! Also the QA1 has grease fittings on all the camber bolt bushings .
If you have any questions Fred , always here to try and help you from afar. I watched a video on U-tube the guy knocked out the camber bolts with a claw hammer ...lol He said see how easy it is .
I had mine apart last year FOG and it came apart real easy but the guy that pressed out the ball joints bent both A arms and had a hell of a time getting them straight again and the new tires are starting to wear on the in side.
Your son must work on alignments and know what he is doing, the front end guys around here are a bunch of idiots and will not tell me how far out my front end is and would guess they don't know.
I just readjusted mine with a tape measure to keep it from wearing out my tires and will get the QA1's this winter.
Good to know they work thanks FOG.
He let me watch , when he did it his Boss let us use the shop on a Saturday. The machine gives out all the readings. Yes he sure knows what he is doing. You have to find yourself a good shop !
Might be cheaper to drive over there and let your son do it right.
I get tired of the guys that think they know what they are doing and you look in there tool box and find, like you said a claw hammer.
-
Similar threads
