74 360 dart sport
Well-Known Member
I have a 74 dart sport how do I remove the rubber bumper I see absolutely no way of getting at the bolt thanks Tom
Not even a 1/4in. Drive will fitGo up through the center of the control arm with a socket and extension
Then sometime in it's life your LCA got bashed in.Not even a 1/4in. Drive will fit
I believe you are correct I have had suspicions because the right front fender is not the original so that means the lca is junk I do have access to a porta power but how would I ever know if it's rightThen sometime in it's life your LCA got bashed in.
Then you gotta figure out a way to spread apart the two halves.
A port-a-power works, but i'm sure you don't have one of them in your toolbox.
I believe you are correct I have had suspicions because the right front fender is not the original so that means the lca is junk I do have access to a porta power but how would I ever know if it's right
That would work, but what if his ball joint stud area is bent out of whack too?It’s not that critical really. Just use the porta power and spread the control arm open to close to where it would be originally and roll on.
I have new upper arms I'm putting inThat would work, but what if his ball joint stud area is bent out of whack too?
Ok, but that hasn't anything to do with your out of shape lower.I have new upper arms I'm putting in
That would work, but what if his ball joint stud area is bent out of whack too?
I need to find a new lca I agree what I am doing is rebuilding the whole front suspensionOk, but that hasn't anything to do with your out of shape lower.
I need to find a new lca I agree what I am doing is rebuilding the whole front suspension
Will lca from a 72 scamp fit my 74 dart sport 360Ok, but that hasn't anything to do with your out of shape lower.
Will lca from a 72 scamp fit my 74 dart sport 360