LD340 flow testing

[12many]

If you have room and can run a one inch spacer it gives you more room to shape the runner entrance.

Will definitely verify how much spacer I can run and radius accordingly, any tips on where to start the radius (assuming use of a 1” spacer) is welcomed. Picking up a couple more burrs tomorrow morning (been working with trees) and really need some ovals. Trying to fix/work a nice radius in the 3/5 and 4/6 runners upper outer walls takes come contorting and work with what I have, is a little tight obviously. But I’m getting it. A 1” spacer is shown in place in picture:

Fugly dividers still to do:

 

[pittsburghracer]

Will definitely verify how much spacer I can run and radius accordingly, any tips on where to start the radius (assuming use of a 1” spacer) is welcomed. Picking up a couple more burrs tomorrow morning (been working with trees) and really need some ovals. Trying to fix/work a nice radius in the 3/5 and 4/6 runners upper outer walls takes come contorting and work with what I have, is a little tight obviously. But I’m getting it. A 1” spacer is shown in place in picture:

View attachment 1715855746

Fugly dividers still to do:

View attachment 1715855750

I don’t think I have any better pictures than these. They probably won’t help you much.

 

[12many]

I don’t think I have any better pictures than these. They probably won’t help you much.



View attachment 1715855756 View attachment 1715855757

I just saw those pics in the closed thread on port matching. Every bit helps. Thanks!