[WANTED] Left side 340 HP exhuast manifold and late 71 340 intake manifold

[70dusterA62]

Been hunting for a while looking for HP 340 exhuast manifold driver side only and intake manifold late 71 I don't want 72 or 73 so with in anywhere with in west side of USA.

 

[Professor Fate]

[FOR SALE] - 340 Driver Side Exhaust Maniflod
@RAT ROD AL

 

[70dusterA62]

[FOR SALE] - 340 Driver Side Exhaust Maniflod
@RAT ROD AL

He already sold that.

 

[GTX JOHN]

I have a late 71 340 Manifold
never cut or modified or milled!
last three #s are 100.
$175.
Also 9800 Super Quad
This is the best # and what I run
on my Small block Racecars that have held National Records.
Good complete with tight shafts and electric chock
$250.
Might work fine as is but after sitting 30 years = I would put
a carb kit in it and check the floats.
$250.
OR
$275
with Holley Mopar linkage conversion installed
Only needed with Auto and Kickdown linkage
still used.

I will be At Winternationals in a couple weeks and could have
one of my race buddies bring it back to Sac and save the shipping
which would be a bunch on the intake (probably nearly 50 lbs)

 

[70dusterA62]

I have a late 71 340 Manifold
never cut or modified or milled!
last three #s are 100.
$175.
Also 9800 Super Quad
This is the best # and what I run
on my Small block Racecars that have held National Records.
Good complete with tight shafts and electric chock
$250.
Might work fine as is but after sitting 30 years = I would put
a carb kit in it and check the floats.
$250.
OR
$275
with Holley Mopar linkage conversion installed
Only needed with Auto and Kickdown linkage
still used.

I will be At Winternationals in a couple weeks and could have
one of my race buddies bring it back to Sac and save the shipping
which would be a bunch on the intake (probably nearly 50 lbs)

As long as in between July to Oct 71 that ideal and super quad as goes I use it for manual car if it required foe mopar adapter that you mention.

 

[GTX JOHN]

The cast date is usually a month or two before car was built.
The 71 cars were finished being built by sometime in July as I recall. I was
buying new Mopars by then.
The collectors on this site can explain better on the date codes = I am a Racer!
If the manifolds were cast in July to Oct = They would be on a 72 car and probably
a 918 or 025 number

 

[70dusterA62]

The cast date is usually a month or two before car was built.
The 71 cars were finished being built by sometime in July as I recall. I was
buying new Mopars by then.
The collectors on this site can explain better on the date codes = I am a Racer!
If the manifolds were cast in July to Oct = They would be on a 72 car and probably
a 918 or 025 number

Ohh good to know I didn't realize that well my 72 340 build on 10/71 actually.

 

[70dusterA62]

Yes you are right about part number end with 025 let me know what to turn up.

 

[GTX JOHN]

I will probably have one of that number: I will look for those dates
that will be tougher!
I am in Tucson racing Stock/Superstock will be back late next week.

 

[70dusterA62]

I will probably have one of that number: I will look for those dates
that will be tougher!
I am in Tucson racing Stock/Superstock will be back late next week.

No problem by then I ll have all the $$ I hope.

 

[killerslant]

Pm sent on intake.