Lock ring tool

[Michael Siple]

Want to r&r fuel sender in 71 duster without removing tank. New tank in , used old sender because it worked well & very accurate. After install naturally no gauge reading. After checks everything points to sender. Lock ring tool would make it easier to do tank installed. Suggestions on lock ring tool please. Thanks -Mike

 

[xLURKxDOGx]

eBay.

Jake

 

[Professor Fate]

Make sure you've got the ground strap back on it or you'll have no reading from a previously working sending unit...

 

[Dusterdenovo]

I made this one out of 1/8" steel. Took a couple of hours with a hack saw and a couple of files. Makes a PITA job a snap now.

 

[rustycowll69]

I believe I just used a brass drift back in the day. I don't know what has changed, but it was 40yrs ago.

 

[67Dart273]

I believe I just used a brass drift back in the day. I don't know what has changed, but it was 40yrs ago.

40-50 years of rust and corrosion? LOLOL. I used a drift and hammer last time, as well

 

[Tooljunkie]

Drift and a hammer, for the last 30. But i do like the hand made wrench.

 

[Michael Siple]

brass drift & hammer when tank is out but in car - tool would make things easier when tank is installed, I'm trying not to remove tank again.

 

[Dana67Dart]

I think I got mine from Classic Ind.

I had to file one of the tabs a bit to fit properly

You will never be sorry for using the right tool

I made this one out of 1/8" steel

I like what you made!