abdywgn
dismantler
I am looking for two measurements. They are both in the engine compartment, one near the hood hinge area and the other vertical from the front bolts go in on the k-frame. Both dimensions are side-to-side width and one the upright portion of the "inner" fenderwells. If the front fenders were off, it would be the vertical area inboard of the fender mounting flange. First width would be side-to-side by the hood hinge area; either in front or behind of the bolts. Whatever is easier to get to. The second one is in the front. If you were to cut the front of the car off at the front edge of where the k-frame and front frame rail meet, go straight up to the same vertical piece of inner fender and measure side-to-side. Thanks for the help! Bob