Looking for a Standard steering column
- Thread starter Marko
- Start date
-
- Status
Do you really need the whole column assembly or just the appropriate length center shaft? I have a whole column out of a '74 w/column auto shift. As long as your key is on the column and not in the dash the center shaft should work fine. If you can clarify where your 38 " measurement comes from I'll gladly measure mine (i.e. tip of threaded steering wheel nut stud to center line of coupler cross shaft hole) $40 plus shipping if interested.
cudamark
Well-Known Member
Three on the tree with power steering is not a very common combination. You'll probably have to do what valiantpatrol suggests and that is to reuse your column and get a P/S shaft out of another. If your column is bad, you'll probably have to get two columns and make one good one out of them. According to Hollander, yours is a one year only column but I know individual parts are the same as other years. You may be able to use a '70-3 column with minor modifications. The '74-5 columns have more differences than the earlier ones but they might be able to be modified as well.
Good luck!
Good luck!
- Status
-
