Looking for Master Cylinder to Prop Valve Lines

[slant six]

Hello,

Does anyone have a part# for just the Master cylinder lines to the prop valve.

I would like to get them in stainless.

for a 1969 dart with disc brakes.
I tried a few websites and was not able to find anything except for full under car sets.

 

[Professor Fate]

Hello,

Does anyone have a part# for just the Master cylinder lines to the prop valve.

I would like to get them in stainless.

for a 1969 dart with disc brakes.
I tried a few websites and was not able to find anything except for full under car sets.

Dr. Diff.
Mopar Front Brake Line Selector for A/B/E Body
You didn't mention if you have the early KH discs or the later '73 and up discs, or if they're power or manual, but he offers lines for most combinations.
Give him a call if you're in doubt.

 

[Murray]

Also Inline Tube.

 

[slant six]

Thanks. I always forget that Dr. Diff has lots of other stuff.

I could not find just the Master cylinder lines on inline tube. I was able to find complete sets.

 

[Kendog 170]

Pardon Our Interruption...

 

[Kendog 170]

Stainless is hard to get a good seal. I forget @toolmanmike or @Oldmanmopar uses something similar to this pic to get a good seal. I wish I knew this trick years back.

 

[slant six]

Well I tried all of the places you guys listed.
Fine lines will not sell them seprately.
Inline tube does not have them listed sepetate either.
Dr. Diff says he is out of lines until his supplier gets their stuff figured out. :-(

 

[MadScientistMat]

Any reason you don't want to just grab some pre flared straight lines and a tubing bender from the local parts store?

 

[4spdragtop]

You could also use Nicop. WAAYYY easier to bend. Rated for both brake and fuel.

 

[Kendog 170]

You could make your own and add this if you wanted.
Pardon Our Interruption...

 

[slant six]

Yes I know all about making my own lines. I have done it a few times.

I am mever happy with the results of my own work on these. Especially for the loops just under the MC. The under car lines have no trouble making. This car already has ss master cylinder lines and I wanted to preserve the look. By buying another set, but maybe the aftermarket has other ideas for me.