Lost Interest... to sell or not to sell?????

[jdakota]

One of the nicest looking Darts I've seen. Somethin about it. Good job.

 

[Salty Dog]

Pull a cover over it. Wait it out. Throw some money into a jar to fix it later.

 

[Pentastarnut]

i think you should let it go, you don't want that horrible looking car just sitting around taking up space.

.......i'll be right over with $500 and the truck and trailer

 

[Sublime69]

Ok guys! I think ill fix the rear end and drive and see if i get re connected to it!

Ok, so i have been out of the mopar scene for a while.. i have a 8 3/4 in the basement that came out of an a-body. Now i know the 73-76 7 1/4 is the same length for flange to flange as the a body 8 3/4 right?? I want to keep my wheels and would like to have disc brakes... and i dont want to spend a ton of money.. is there any disc conversions i can get from the junk yard?

 

[needsaresto]

Should be the same length. Bolt pattern might be an issue,depending what you have currently. Change the drive shaft? I hope not...

 

[demonmike70]

Ok guys! I think ill fix the rear end and drive and see if i get re connected to it!

Ok, so i have been out of the mopar scene for a while.. i have a 8 3/4 in the basement that came out of an a-body. Now i know the 73-76 7 1/4 is the same length for flange to flange as the a body 8 3/4 right?? I want to keep my wheels and would like to have disc brakes... and i dont want to spend a ton of money.. is there any disc conversions i can get from the junk yard?

seeing how close you are to me if need help pm me

 

[Plymouth 340]

Keep it, its a great car! If you sell it youd look back and think "why did i sell that Dart?!?!?"

 

[Mad Dart]

I'll buy the car and assume your problem, let me know when you are ready!

 

[67cudafb]

http://www.ebay.com/itm/Chrysler-Mo...3662153?pt=Motors_Car_Truck_Parts_Accessories Check these out looks like they work with stock axle bearing. You are going to need new driveshaft I think 7 1/4 is to long if I rember right good luck