monc440
Active Member
Found my Mopar engine book. Don’t know how much use it will be as it is a 1984 addition. The newest head listed is the stage V head. Guess I need an upgrade book. Lol
Mopar Stage VI 6 heads questions
- Thread starter monc440
- Start date
-
PRH
Well-Known Member
I don’t think you’re going to find any book that offers much useful info regarding Mopar Stage 6 heads.
My 470 stroker had those stage 6 heads. They were ported by Muscle Motors. Flowed 340ish by and 250ish at 600 lift. I used a .625 lift comp cam. I had the Mopar Performance blue rockers on it No offset. 0ver 700 lbs pressure springs. B block. Dynoe’d at c 655 hp c and 625 tq. Kim
Last edited:
monc440
Active Member
Thanks that is helpful info. Thanks for attaching the pictures.
1969cuda
Well-Known Member
Dwane did a set of heads for me and I couldn’t be happier
pomonamissel
Well-Known Member
@oldkimmer , those are standard port ported right ?
U betcha
pomonamissel
Well-Known Member
@oldkimmer , thats a lot of cfm on these standard port ported heads , did you like the power band ?
I know this is a couple of years old but I just seen this. Yes, my converter flash stalled to 4200. Pulled hard from 4200-7400. Very happy. Kim. @pomonamissel
pomonamissel
Well-Known Member
well i'm glad to help my friend . but what did i do for you ? thanks a great pull band , i've got a 5k flash convertor ran great from 5k to 8k in a hot 383 that ran 10.73 back in 73 in a 63 fury , it went record in 73 ihra . an all steel car . this was the street version of that car with a rb mw package . new package will be way more than it was .
@monc440 what ever became of this build? Kim
pomonamissel
Well-Known Member
so i forgot the price in my friends duster ad , and toolmike deleted it instead of writing me to put the price in . so old kim . i guess this site won't be =get a chance to purchase this nice duster , goodbye !
Oh my, I thought u had a price around $45,000?
RAMM
Well-Known Member
Sounds exactly like a 470 I built with TF 240,s. Lol. J.Rob
RAMM
Well-Known Member
If I was OP , I'd send a head to T&D Machine and have them set me up with a paired shaft rocker system for whatever lift I thought I needed. Working on a set of Stage VI,s right now and they flow close to 340cfm. Customer is currently in the same boat searching for rockers. This build has already been in my shop 4 yrs....probably not leaving anytime soon. J.Rob
P/M sent. Kim.
-
Similar threads
